All Products

Bakelite-bonded cutting wheel with hardening mesh. Used for cutting parts and structures from various steel grades. Diameter - 22.2 mm. Abrasive material - electrocorundum ...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Made of S2 tool steel by the drawing method. Has an external TORX working profile of the short arm and TORX profile with an opening of the long arm. Hardened to 47-52 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Made by cold stamping method from steel pipe with wall thickness 2mm. Has a hole for the tap wrench with Ø 8mm. Hardened to 38-42 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Designed to extend grease gun applicability. Has standard threads for coupling and grease gun connection...

Designed to extend grease gun applicability. Has standard threads for coupling and grease gun connection...

Twist drill with cylindrical shank. Material - high-speed steel Р6М5. Drill accuracy class - B. Meets the requirements of GOST 10902-77. Comes in an individual blister pack of 2-3 pieces of the same size...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Предназначен для контроля автомобильной бортовой сети с напряжением 6, 12 или 24 В. Укомплектован проводом с зажимом “крокодил”. Может быть подключен в любом месте электропроводки. Indication is carried out by a lamp glow,...