All Products

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Set includes tube sockets and a tap wrench. The keys are stamped from a cold-rolled steel pipe. They have holes for the tap-wrench. Wrenches are hardened to a hardness of 38–42 HRC. Protected from corrosion by nickel-chromium coating. The kit is shipped in individual blister packs...

Set is designed for number marking on plastic materials. Stamps of the set are made by the milling method from chrome-vanadium tool steel. Hardened to 58-62 HRC. Protected against corrosion by phosphatizing. Set includes 9 number stamps from 0 to 9. Packaging - plastic case...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Made from chrome-vanadium steel by the cold stamping method. Has 8 point working profile. Equipped with a hole 21 mm in diameter for the tap wrench. Protected against corrosion by the matt nickel-chromium coating...

Used for removal and installation oil filters of internal combustion engines. Made by the method of precision casting from aluminum alloy. Has internal 1/2" (12,5 mm) square drive that allows to use tap wrenches and extensions, also to install a filter with a controlled torque in full compliance w..

Hammer head is made of 45 steel by the hot stamping method (forging hammers). Impact hardness - 44-48 HRC. Square-shaped hammer head with flat and pointed impact parts. Hammer handle is made of fiberglass and has a high mechanical strength and resistance to aggressive medium. Handle is equipped ..

Designed for using with a pneumatic impact tool. External 6-point working profile. Square drive 1/2". Made by the method of cold stamping. Socket material - chrome-molybdenum steel. Protected against corrosion by the chemical oxidation...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard open end profile and 12-point box end working profile. Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °. Heat treated to hardness 39-41 HRC. ..

Fiberglass tape 30 m long and 13 mm wide. One side has a metric scale, the other an inch scale. The ribbon ends with a metal loop placed in a plastic cassette equipped with a winding handle. Ribbon color white...

Steel hammer mounted on a handle made of damage-resistant fiberglass-based material. The surface of the hammer is blackened...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Rods are made by resistance welding and reinforced with the steel riveted pad. Reduced arm length and wrench rod diameter. Protected against corrosion by synthetic polymer co..