All Products

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Equipped with the holes with a diameter 15 mm for the tap wrench. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Intended for professional usage and has improved strength characteristics and extended service life. Screwdriver has a Phillips cross magnetized working profile. Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 HRC and protected against corrosion by the chromium ..

They are used for crimping wire sleeves, tubes, stamped non-insulated terminals during electrical installation works. Working part of the tool is multifunctional designed for works with different types of attachments. Intended for wires with 0.08 to 6.0 mm² cross-section. Equipped with cutting pl..

They are used for crimping wire sleeves, tubes, stamped non-insulated terminals during electrical installation works. Working part of the tool is multifunctional designed for works with different types of attachments. Intended for wires with 0.08 to 6.0 mm² cross-section. Equipped with cutting pl..

Made by hot stamping (forging hammers). Material – chrome-vanadium tool steel 31CrV3. Hardened to 43-45 HRC. Has comfortable ergonomic rubberized handles. It is eqquiped with pullback spring. Protected against corrosion by phosphatizing...

Tap wrench is made by cold stamping method. Has a swivel head and a spring-loaded retaining ball. Material - chrome-vanadium tool steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corrosion...

Used to measure the oil pressure of GAZ, UAZ, ZIL, Gazel and another types of cars. Installed in place of a standard oil pressure tester or a test lamp sensor. Manometer with a diameter 62 mm is protected by a rubber cover and has a measurement limit 6 kgf/cm². Equipped with a flexible hose 350 m..

Designed for fixing parts during carpentry and locksmith works. Made of steel strip with fixed stop sponge. The sliding jaw is equipped with a working clamping screw with a handle...

Designed for fixing parts during carpentry and locksmith works. Made of steel strip with fixed stop sponge. The sliding jaw is equipped with a working clamping screw with a handle...

It is used to remove humidity out of the compressed air. It has a valve for draining liquid. Thread size - 1/4". Comes stored and orginized in a individual blister pack...

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

Used to determine the horizon line. Tool type - aluminum rail. Has three indicator eyes - 180°, 90° and 45°. Features an integrated magnetic strip for securing the tool to metal surfaces. Measuring accuracy - 1.0 mm/1 m...