All Products

Предназначен для контроля автомобильной бортовой сети с напряжением 6, 12 или 24 В. Укомплектован проводом с зажимом “крокодил”. Может быть подключен в любом месте электропроводки. Indication is carried out by a lamp glow,...

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Has a working profile Torx®. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...