All Products

Geodetic measure 20 m long and 12 mm wide. is designed for measuring long distances in the open or indoors. The tape is made of abrasion and fade resistant fiberglass fiberboard. The open casing design keeps the belt clean and prevents the belt from jamming in the closed cassette if contaminated ..

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard open end profile and 12-point box end working profile. Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °. Swivel allows you to change the angl..

Made of chrome-vanadium steel by the hot stamping method (forging hammers). Equipped with comfortable rubber handles which protect the palm from slippage. Jaws induction hardened to 55-58 HRC. Protected from corrosion by phosphating...

Made of chrome-vanadium tool steel by the cold stamping method, hardened and protected from corrosion by the chromium protective and decorative coating. Has internal 12.5 mm 1/2" square drive for tap wrench and outer 6-point socket for 21 mm wrench. Gripping mechanism consists of a holder with th..

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

Used to measure the compression of VAZ 2101-099 engines and engines with not deep plug boxes. Manometer with a diameter 51 mm has a measurement limit 16 kgf/cm². Equipped with an aluminum bar 130 mm long with knurling, threaded tip, pressure relief valve and conical rubber nozzle. Thread size - M..

Designed for using with a pneumatic impact tool. Internal Torx® working profile. Square drive 1/2". Made by the method of cold stamping. Socket material - chrome-molybdenum steel. Protected against corrosion by the chemical oxidation...

Designed for using with a pneumatic impact tool. Internal Torx® working profile. Square drive 1/2". Made by the method of cold stamping. Socket material - chrome-molybdenum steel. Protected against corrosion by the chemical oxidation...

Intended for dismantling external and internal bearings, pulleys and gears from the shafts and other interference fitted parts. Swivel locking design of grippers allows to hold securely the dismountable part. Can be used for external and internal grip. Has a thrust bolt with a standard hex socket..

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Intended for dismantling and installation of oxygen sensors. 6-point socket has slotted design. Equipped with a standard square drive 1/2" (12.5 mm) for the tap wrench. Made of chrome vanadium tool steel by cold stamping. Protected against corrosion by phosphatizing. Comes stored and orginized ..

Intended for dismantling and installation of oxygen sensors. 6-point socket has slotted design. Equipped with a standard square drive 1/2" (12.5 mm) for the tap wrench. Made of chrome vanadium tool steel by cold stamping. Protected against corrosion by phosphatizing. Comes stored and orginized ..