All Products

Made from chrome-vanadium steel by the cold stamping method. Has 8 point working profile. Equipped with a hole 21 mm in diameter for the tap wrench. Protected against corrosion by the matt nickel-chromium coating...

Made by cold stamping method. Square drive shape allows to rotate the fastener at an angle up to 15 °. Equipped with a spring-loaded holding ball. Material - chrome-vanadium tool steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corro..

Made by hot stamping (forging hammers). Material – chrome-vanadium tool steel 31CrV3. Hardened to hardness 44-47 HRC. Cutting edges are induction hardened to 55-58 HRC. Equipped with comfortable ergonomic two-component handles. Protected from corrosion by nickel-chromium coating with matt surfa..

Forged fluted jaws are made of hardened steel. Non-slip handle makes it easy to use the key. screw mechanism regulating the opening of the jaws. forged steel and hardened steel jaws. chrome vanadium alloy steel wrench. handle is covered with anti-slip plastic...

Used for dismantling oil filters of internal combustion engines. Wrench has a gear self-clamping design with three angled prongs. Knurling on the prongs allows reliably fix the filter. Wrench material – chrome-vanadium tool steel. Has a standard 3/8 " square drive for tap wrench. Equipped with ..

Used for fixing parts of various shapes during mounting and welding works. Made of chrome-vanadium steel 31CrV3 by the hot stamping method (forging hammers). Have comfortable ergonomic two-component plastic handles. C-shaped gripper design with supporting pivots allows to fix details of complex s..

Intended for dismantling external and internal bearings, pulleys and gears from the shafts and other interference fitted parts. Swivel locking design of grippers allows to hold securely the dismountable part. Can be used for external and internal grip. Has a thrust bolt with a standard hex socket..

Used for dismantling oil filters of internal combustion engines. The wrench has a gear-driven self-clamping design with three curved flat grips that hold the filter securely in place...

Designed for quick joining of different materials, such as wood to fabric, cardboard, paper or leather. Used in upholstery, roofing, trim, building trim, etc. Connects materials by means of a steel clamp driven with high force. The stapler is designed for hammering typical steel rectangular stapl..

Used to measure the oil pressure of VAZ, GAZ, UAZ, ZIL, Gazel and another types of cars. Installed in place of a standard oil pressure tester or a test lamp sensor. Manometer with a diameter 62 mm is protected by a rubber cover and has a measurement limit 6 kgf/cm². Equipped with a flexible hose ..

Used for fixing parts of various shapes during mounting and welding works. Made of chrome-vanadium steel 31CrV3 by the hot stamping method (forging hammers). Have comfortable ergonomic two-component plastic handles. W-shaped grippers allows to fix parts of different shape. It is eqquiped with a ..

Made from chrome-vanadium steel by the cold stamping method. Has 6-point socket. Equipped with a hole 21 mm in diameter for the tap wrench. Protected against corrosion by the matt nickel-chromium coating...