All Products

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Used to measure the compression of VAZ 2101-099 engines and engines with not deep plug boxes. Manometer with a diameter 62 mm is protected by a rubber cover and has a measurement limit 16 kgf/cm². Equipped with an aluminum bar 130 mm long with knurling, threaded tip, pressure relief valve and coni..

It is used for holding workpieces during locksmiths and assembly works. Made by precision steel casting. Protected from corrosion by impact resistant paint and varnish coating...

Intended for dismantling fuel system tubes, engine cooling system, ventilation and air conditioning system. Equipped with spring lock disconnectors 3/8" (red), 1/2" (blue), 5/8" (black), 3/4" (white), fuel line disconnectors 3/8" (yellow) and 1/2" (green). Equipped with fuel line disconnectors 5/1..

Intended for dismantling fuel system tubes, engine cooling system, ventilation and air conditioning system. Equipped with spring lock disconnectors 3/8" (red), 1/2" (blue), 5/8" (black), 3/4" (white), fuel line disconnectors 3/8" (yellow) and 1/2" (green). Equipped with fuel line disconnectors 5/1..

Designed for spraying non-corrosive technical fluids and water. Has a hand pump and an adjustable spray head. Equipped with a safety valve. Equipped with an additional injector...

Designed for spraying non-corrosive technical fluids and water. Has a hand pump and an adjustable spray head. Equipped with a safety valve. Equipped with an additional injector...

Set of transparent heat shrink tubing with a tin ring in the middle and two rings of hotmelt adhesive on the sides, which further seals the connection...

Manual adjustable spiral reamer designed to produce precise holes with high quality machined surface. Made of tool steel P6M5 in a full compliance with GOST 3509-71. Adjustment is made by moving a steel core in the tapered bore of the casing using an adjusting screw. Limit of change of the workin..

Intended for dismantling and installation of oxygen sensors. 6-point socket has slotted design. Equipped with a standard square drive 1/2" (12.5 mm) for the tap wrench. Made of chrome vanadium tool steel by cold stamping. Protected against corrosion by phosphatizing. Supplied on an individual p..

Intended for dismantling and installation of oxygen sensors. 6-point socket has slotted design. Equipped with a standard square drive 1/2" (12.5 mm) for the tap wrench. Made of chrome vanadium tool steel by cold stamping. Protected against corrosion by phosphatizing. Supplied on an individual p..

Designed to control the working pressure in the fuel injection systems of injection engines of cars, including VAZ cars with a 16-valve engine, which can be connected using Schroeder port. Allows to measure the oil pressure of the lubrication system of the engines of VAZ cars and a number of forei..