All Products

Parts cleaning brush (steel)...

Made by the cold stamping method from chrome-vanadium tool steel 50BV30. Has an internal hex profile 1/4" for bits installation and internal square drive 1/4" for the tap wrench. It is chrome plated and matt finish to resist corrosion...

Made by the cold stamping method from chrome-vanadium tool steel 50BV30. Has an internal hex profile 1/4" for bits installation and internal square drive 1/4" for the tap wrench. It is chrome plated and matt finish to resist corrosion...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Made by cold stamping method from steel pipe with wall thickness 2 mm. Has a hole for the tap wrench with Ø 8 mm. Hardened to 38-42 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Designed for use with automatic rivet gun. Used to join sheet products from various materials. Includes an aluminum sleeve and removable steel rod. Supplied in packages of 50 pieces...

Made of chrome-vanadium tool steel by the cold stamping method. Has a working profile Torx®. Screwdriver rod is hardened and protected against corrosion by the chromium plating. Has a magnetized working part. Equipped with a plastic handle with rubber anti-slippage coating...

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

Spanner is made by the hot stamping method (forging hammers). Has a standard open end working profile. Material – chrome-vanadium tool steel CRV6150. c. Protected from corrosion by chrome coating with matt surface effect...