All Products

Made of chrome-vanadium steel by the drawing method. It has standart hex external operating profile. Heat treated to hardness 47-52 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Bakelite-bonded cutting wheel with hardening mesh. Used for cutting parts and structures from various steel grades. Diameter - 22.2 mm. Abrasive material - electrocorundum ...

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 75 degrees offset of the box end profile relatively to the wrench surface provides more c..

Twist drill with cylindrical shank. Material - high-speed steel Р6М5. Drill accuracy class - B. Meets the requirements of GOST 10902-77. Comes in an individual blister pack of 2-3 pieces of the same size...

Twist drill with cylindrical shank. Material - high-speed steel Р6М5. Drill accuracy class - B. Meets the requirements of GOST 10902-77. Comes in an individual blister pack of 2-3 pieces of the same size...

Protective gloves made of white knitted polyester with a coating of soft, abrasion-resistant blue nitrile. Recommended for workshops, vulcanizing, warehousing, gardening and wherever a basic level of protection from low risk external factors is required, protecting hands from minor cuts, abrasions,..

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

The work gloves are tied with two threads. Stitched edge of work gloves. The glove is double-sided, it can be worn with both left and right hand, you can use both sides of the glove for double durability. 42 % polyester/ 23 % cotton, 35 % PVC in polka dots...

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...