All Products

Designed for unscrewing and installing threaded studs 6-20 mm in diameter. Made of chrome-vanadium tool steel. Rotating eccentric is hardened and has a knurling for reliable fasteners gripping. Has a dismountable structure and an internal square drive 1/2" (12.5 mm) for the tap wrench. Delivere..

The 1/2-inch diameter end of the wrench fits all heads of this size. Heads in sizes 17-19/21-23 mm are suitable for most car brands. Loosens the most stuck screws. Double-press lever, extendable to a length of 50 cm...

Intended for liquid lubricants injection into grease cups H and K types. Equipped with a steel tube with coupling. Has a working handle pistol type. Grease gun capacity is 120 ml. Working pressure - 200 atm (2900 psi). Maximum pressure – 272 atm (4000 psi)...

Intended for liquid lubricants injection into grease cups H and K types. Equipped with a steel tube with coupling. Has a working handle pistol type. Grease gun capacity is 120 ml. Working pressure - 200 atm (2900 psi). Maximum pressure – 272 atm (4000 psi)...

It is used to measure the oil pressure of the engines of VAZ, GAZ cars and other foreign cars. Installed in place of a standard oil pressure tester or a test lamp sensor. Manometer with a diameter 62 mm is protected by a rubber cover and has a measurement limit 6 kgf/cm². Equipped with a flexible..

It is used to measure the oil pressure of the engines of VAZ, GAZ cars and other foreign cars. Installed in place of a standard oil pressure tester or a test lamp sensor. Manometer with a diameter 62 mm is protected by a rubber cover and has a measurement limit 6 kgf/cm². Equipped with a flexible..

Designed for using with a pneumatic impact tool. 6-point operating profile. Made by the method of cold stamping. Material - chromium molybdenum steel. Has a hardness 42 HRC. It is eqquiped with protective plastic case. Wear-resistant, suitable for the long-term usage at max loads. Coloured ch..

The inserts are cold stamped from chrome vanadium tool steel, hardened to a hardness of 55-60 HRC and protected against corrosion by phosphating. Working profile - external Hex. Inserts length - 30 mm and 75 mm. Bits operating size - Н4, Н5, Н6, Н7, Н8, Н10, Н12. The kit is equipped with an adap..

Intended to complete sets of silent blocks pullers AvtoDelo 40915 and 40925. Allows to extend set applicability or replace worn or broken studs. Made of 45 steel, hardened to 20-26 HRC and protected from corrosion by phosphatizing. Equipped with nuts with the supporting bearings...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard open end profile and 12-point box end working profile. Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °. Swivel allows you to change the angl..

Used for transferring gasoline, diesel fuel, kerosene, liquid lubricants, various technical liquids and water. Equipped with two hoses 1 m in length. Capacity of the filling tank - 500 ml. Created pressure (MPa) - 0.3. Individual packaging - cardboard box...

Used for transferring gasoline, diesel fuel, kerosene, liquid lubricants, various technical liquids and water. Equipped with two hoses 1 m in length. Capacity of the filling tank - 500 ml. Created pressure (MPa) - 0.3. Individual packaging - cardboard box...