All Products

Intended for the control of a brake liquid condition. Determines the presence of moisture in the brake luquid and displays the percentage of it content on the LED. Intended for testing brake fluids DOT3, DOT4 and DOT5,1. Comes stored and orginized in a individual blister pack...

Intended for the control of a brake liquid condition. Determines the presence of moisture in the brake luquid and displays the percentage of it content on the LED. Intended for testing brake fluids DOT3, DOT4 and DOT5,1. Comes stored and orginized in a individual blister pack...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard hex working profile and an internal 4-point profile for the fittings of the truck wheels. Equipped with the holes with a diameter 20 mm for the tap wrench. Protected against corrosion by the nickel..

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard hex working profile and an internal 4-point profile for the fittings of the truck wheels. Equipped with the holes with a diameter 20 mm for the tap wrench. Protected against corrosion by the nickel..

Brake caliper rewind tool for cars equipped with a disc braking system. Is used for Audi, VW, Fiat, Ford, Nissan, Opel, Peugeot, Porsche, Renault, Rover with brake systems ATE, Bendix, Delco и Girling. Protects the pistons and cups of cylinders from damage. Made by the hot stamping method (forg..

Brake caliper rewind tool for cars equipped with a disc braking system. Is used for Audi, VW, Fiat, Ford, Nissan, Opel, Peugeot, Porsche, Renault, Rover with brake systems ATE, Bendix, Delco и Girling. Protects the pistons and cups of cylinders from damage. Made by the hot stamping method (forg..

Spanner is made by the hot stamping method (forging hammers). Has a standard open end profile and 12 point box end profile. Material – chrome-vanadium tool steel CRV6150. c. Protected from corrosion by chrome coating with matt surface effect...

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Equipped with integrated holding magnetic insert. Protected from corrosion by chrome plating...

Used for giving appropriate shape to the soft copper and aluminum pipes of the brake system. Intended for pipes from 3 to 10 mm in diameter. Allows to bend pipes at an angle of 90 °. Handles are rubber coated to reduce pressure on the palm and ease of use. Comes stored and orginized in a individ..

Set is equipped with a plastic holder...

Set is equipped with a plastic holder...

Intended to complete sets of silent blocks pullers AvtoDelo 40915 and 40925. Allows to extend set applicability or replace worn or broken studs. Made of 45 steel, hardened to 20-26 HRC and protected from corrosion by phosphatizing. Equipped with nuts with the supporting bearings...