All Products

Made by cold stamping method. Equipped with a spring-loaded holding ball. Material - chrome-vanadium steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corrosion...

Twist drill with cylindrical shank. Material - high-speed steel Р6М5. Drill accuracy class - B. Meets the requirements of GOST 10902-77. Comes in an individual blister pack of 2-3 pieces of the same size...

Twist drill with cylindrical shank. Material - high-speed steel Р6М5. Drill accuracy class - B. Meets the requirements of GOST 10902-77. Comes in an individual blister pack of 2-3 pieces of the same size...

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Made of S2 tool steel by the drawing method. Has an external TORX working profile of the short arm and TORX profile with an opening of the long arm. Hardened to 47-52 HRC. Protected from corrosion by chrome plating...

Made of S2 tool steel by the drawing method. Has an external TORX working profile of the short arm and TORX profile with an opening of the long arm. Hardened to 47-52 HRC. Protected from corrosion by chrome plating...

It is designed for cleaning surfaces from old paint, corrosion and contamination. Has several rows of bristles made of a steel wire. Wooden handle of a brush...

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

Spanner is made by the hot stamping method (forging hammers). Has a standard open end profile and 12 point box end profile. Material – chrome-vanadium tool steel CRV6150. c. Protected from corrosion by chrome coating with matt surface effect...

Spanner is made by the hot stamping method (forging hammers). Has a standard open end working profile. Material – chrome-vanadium tool steel CRV6150. c. Protected from corrosion by chrome coating with matt surface effect...

Has a working profile Torx®. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Has a working profile Torx®. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...