All Products

Professional reamers for removing welds, body seams and welds. The drills are specially designed for spot drilling. Made of high quality HSS high speed steel, which prevents dulling and overheating of bits. A quick and easy way to remove spot welds of the most common sizes in auto repair and body..

Intended for dismantling of external bearings, pulleys and gears from shafts and other parts interference fitted. Has a system of adjusting and fixing working jaws position which allows at same time to displace the grippers relatively to the thrust bolt. Can be used only for external grip of part..

Intended for dismantling external and internal bearings, pulleys and gears from the shafts and other interference fitted parts. Adjustable fixed jaws allow holding securely the dismantled part. Can be used for external and internal grip. Puller stop bolt has a conical support and a metric carving..

Intended for liquid lubricants injection into grease cups H and K types. Supplied with a metal tube, four lug coupling and a flexible hose. Can be filled by a centralized lubrication feeding system or a grease cartridge. Working grease gun head is equipped with a pressure relief valve. Working l..

Intended for liquid lubricants injection into grease cups H and K types. Supplied with a metal tube, four lug coupling and a flexible hose. Can be filled by a centralized lubrication feeding system or a grease cartridge. Working grease gun head is equipped with a pressure relief valve. Working l..

Designed for dismantling the ignition coils of engines of VAG cars. Applicable for 1.2 gasoline engines; 1.4; 1.8 and 2.0 FSi, TFSi, TSi (from 2013 onwards). The puller is a functional analogue of the original T10530 tool. Comes stored and orginized in a individual blister pack...

• Designed for dismantling the ignition coils of engines of VAG cars. • Applicable for 1.2 gasoline engines; 1.4; 1.8 and 2.0 FSi, TFSi, TSi (from 2013 onwards). • The puller is a functional analogue of the original T10530 tool. • Comes stored and orginized in a individual blister pack...

Made by cold stamping method. It is used with pneumatic tool. Equipped with a spring-loaded holding ball. Material - chrome-molybdenum tool steel. It has an additional hole for use as a wrench. Protected against corrosion by phosphatizing...

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Equipped with integrated holding magnetic insert. Protected from corrosion by chrome plating...

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Equipped with integrated holding magnetic insert. Protected from corrosion by chrome plating...

Intended to test the starter batteries with a voltage 12 V and a capacity up to 190 A / h. It allows to check the level of charging, availability of the battery short circuit, to test the charging system and the condition of the starter, as well as to measure the voltage, including the on-load simu..

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...