All Products

Designed for lifting vehicles during repair work. Equipped with a safety valve which prevents exceeding the maximum permissible load. Equipped with the hydraulic pump drive handle. Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C. Has an additional wo..

Designed for using with a pneumatic impact tool or wrenches with a torque amplifier. Internal 6-point working profile. Made by hot stamping (forging hammers). Socket material - chrome-molybdenum steel. Protected against corrosion by phosphatizing...

The set consists of 5 different long tongs...

• Designed for welding works. • GOST 2246-70. • Packaging - plastic coil...

Used for vacuum system diagnostics. Main part of the device - manual vacuum pump which allows to create a vacuum up to 760 mm Hg. Equipped with adapters to connect to various vacuum systems. Due to the presence of special container in the kit it can be used to remove air from the brake system. H..

Ideal for limited space. Turning the knob cuts a square. Can also be used as a conventional wrench for tightening or loosening. Suitable for both right and left-handed cutting. The lapel is provided by offsetting the square...

. Equipped with a switch and retaining ball. Made by hot stamping (forging hammers). Material - chrome-vanadium steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corrosion...

Designed for tightening fasteners with controlled torque moment of force. Equipped with rratchet mechanism with flag switch. Has knurled handle to protect the palm slippage. It is chrome plated and matt finish to resist corrosion. Individual packaging - plastic case...

Designed for lifting vehicles during repair work. Equipped with a safety valve which prevents exceeding the maximum permissible load. Equipped with the hydraulic pump drive handle. Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C. Has an additional wo..

. Equipped with a flag switch and holding ball. Made by hot stamping (forging hammers). Material - chrome-vanadium steel CrV50BV30. It is hardened to hardness not less than 39HRC. Has a hole for the tap wrench with diameter 20 mm. It is chrome plated and matt finish to resist corrosion...

Used to adjust tension of gas distribution system drive belt and belts of auxiliary aggregates of internal combustion engines. Intended for working with the most automotive belts including cogged and poly V-belts. Has micrometric screw for testing belt tension level. Comes stored and orginized in..

Used to adjust tension of gas distribution system drive belt and belts of auxiliary aggregates of internal combustion engines. Intended for working with the most automotive belts including cogged and poly V-belts. Has micrometric screw for testing belt tension level. Comes stored and orginized in..