All Products

Made by cold stamping method. Equipped with a spring-loaded holding ball. Material - chrome-vanadium steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corrosion...

Made of chrome-vanadium tool steel by the cold stamping method. Has a working profile Torx®. Screwdriver rod is hardened and protected against corrosion by the chromium plating. Has a magnetized working part. Equipped with a plastic handle with rubber anti-slippage coating...

Made of chrome-vanadium tool steel by the cold stamping method. Has a working profile Torx®. Screwdriver rod is hardened and protected against corrosion by the chromium plating. Has a magnetized working part. Equipped with a plastic handle with rubber anti-slippage coating...

Made by cold stamping method from steel pipe with wall thickness 2 mm. Has a hole for the tap wrench with Ø 8 mm. Hardened to 38-42 HRC. Equipped with a rubber restraining insert. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Made by cold stamping method from steel pipe with wall thickness 2 mm. Has a hole for the tap wrench with Ø 8 mm. Hardened to 38-42 HRC. Equipped with a rubber restraining insert. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Used for tapping of internal thread in blind and through holes with tap holder. Material - high-speed steel 9ХС. Hardened to 62-64 HRC. Comes stored and orginized in a individual blister pack...

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

Cup brush is intended for cleaning metal, wood and plastic surfaces from old paint, dirt and corrosion. Brush bristle has brass coating. Brush is equipped with a shank with a diameter 6 mm for installation in the chuck of electric drill. Maximum brush rotation speed - 4500 rpm. Comes stored and ..

End brush is intended for cleaning metal, wood and plastic surfaces from old paint, dirt and corrosion. Brush bristle has brass coating. Brush is equipped with a shank with a diameter 6 mm for installation in the chuck of electric drill. Maximum brush rotation speed - 4500 rpm. Comes stored and ..

End brush is intended for cleaning metal, wood and plastic surfaces from old paint, dirt and corrosion. Brush bristle has brass coating. Brush is equipped with a shank with a diameter 6 mm for installation in the chuck of electric drill. Maximum brush rotation speed - 4500 rpm. Comes stored and ..

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...