All Products

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

Designed for use with grease guns. Has a three lug spring-loaded design with a ball valve. Coupling 42005 has a four lug design. Supplied in individual blister packaging (excluding 42000)...

Bakelite-bonded cutting wheel with hardening mesh. Used for cutting parts and structures from various steel grades. Diameter - 22.2 mm. Abrasive material - electrocorundum ...

Made of the chrome-vanadium tool steel by the hot stamping method. Has 12 point working profile OVER DRIVE. Spanner heads are made with high accuracy and hardened to 39-41 HRC. Wrench is protected from corrosion by the matt nickel-chromium coating...

Made of the chrome-vanadium tool steel by the hot stamping method. Has 12 point working profile OVER DRIVE. Spanner heads are made with high accuracy and hardened to 39-41 HRC. Wrench is protected from corrosion by the matt nickel-chromium coating...

Made by the method of cold stamping. Equipped with a spring-loaded retaining ball. Material - chrome-vanadium tool steel CrV50BV30. It is hardened to hardness not less than 39 HRC. An additional hole allows to use a head with an appropriate extension cord as a T-handle. Wear-resistant, suitable..

Made of S2 tool steel by the drawing method. Has a standard external hex working profile and a ball hex profile of the long arm. Heat treated to hardness 47-52 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard internal hex working profile. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Set includes screwdrivers with a round rod. Packaging set - blister...

Designed to extend grease gun applicability. Has standard threads for coupling and grease gun connection...

Intended for extracting pins, retaining sleeves and other parts which require force. Material - tool steel 60CRV. Hardness of the working part - 52-58 HRC. Punch length – 150 mm. Has knurling made by rolling method which prevents palm slippage. Protected against corrosion by the chemical oxidat..

Intended for extracting pins, retaining sleeves and other parts which require force. Material - tool steel 60CRV. Hardness of the working part - 52-58 HRC. Punch length – 150 mm. Has knurling made by rolling method which prevents palm slippage. Protected against corrosion by the chemical oxidat..