All Products

Intended for repair and maintenance works of brake system Opel. Has an internal 5 point working profile. Made of chrome-vanadium steel by the cold stamping method, hardened and protected from corrosion by chemical oxidation. Has a standard square drive 1/2" (12.5 mm) for the tap wrench. Supplie..

Intended for repair and maintenance works of brake system Opel. Has an internal 5 point working profile. Made of chrome-vanadium steel by the cold stamping method, hardened and protected from corrosion by chemical oxidation. Has a standard square drive 1/2" (12.5 mm) for the tap wrench. Supplie..

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 75 degrees offset of the box end profile relatively to the wrench surface provides more c..

Magnetic welding angle is used for fixing parts during welding work. It frees hands and allows welding work to be carried out by one welder, without assistants...

Made by the method of cold stamping. Equipped with a spring-loaded retaining ball. Material - chrome-vanadium tool steel CrV50BV30. It is hardened to hardness not less than 39 HRC. Protected from corrosion by chrome plating with matt surface effect...

Insert with the external 4-point working profile. Socket is made by cold stamping method. Material – chrome-vanadium steel CrV50BV30. Hardened to 45-47 HRC. Material of inserts -S2 tool steel S2. Protected from corrosion by the chromium coating...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). L-shaped wrench handle has a polymer coating which prevents palm slippage. Wrench has a standard hex working profile. Wrench working part is equipped with a retaining rubber insert. Wrench is equipped with a ste..

Inserts are made by the cold stamping method of the S2 tool steel, hardened to 55-60 HRC and protected from corrosion by phosphatizing. External 12-point Spline inserts working profile. Inserts length - 30 mm. Bits operating size - М5, М6, М8, М10, М12. Individual packaging - a blister...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard internal hex working profile. Short wrench arm with a through hole for working with long pins. Heat treated to hardness 39-41 HRC. Protected against corrosion by the nickel-chromium coating with t..

Twist drill with cylindrical shank. Material - high-speed steel Р6М5. Drill accuracy class - B. Meets the requirements of GOST 10902-77. Comes in an individual blister pack of 2-3 pieces of the same size...

Made of the chrome-vanadium tool steel by the hot stamping method. Spanner hex working profiles manufactured with high accuracy. c. Equipped with a hole 8 mm in diameter for the tap wrench. Wrench is protected from corrosion by the matt nickel-chromium coating...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Rod of the wrench is provided with a mounting spade. Heat treated to hardness 39-41 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effe..