All Products

Designed for accurate stripping of electrical wires from various types of insulation without damaging the conductive part. Applicable for wires with a cross-section from 0.5 to 6.0mm², as well as for flat wires up to 8.0mm wide. Working parts are made of tool steel with subsequent heat treatment. ..

Intended for dismantling plastic fasteners that hold vehicle interior trim. Made of chrome-vanadium tool steel. Has a comfortable plastic handle...

Made from chrome-vanadium steel by the cold stamping method. Has 6-point socket. Equipped with a hole 21 mm in diameter for the tap wrench. Protected against corrosion by the matt nickel-chromium coating...

Used to restore the functionality of mechanism of the ratchet with 45 teeth. Intended for repair works of the ratchet 39728. Contains a complete set of the ratchet mechanism...

Used to restore the functionality of mechanism of the ratchet with 45 teeth. Intended for repair works of the ratchet 39728. Contains a complete set of the ratchet mechanism...

Insert with a hex external working profile. Socket is made by cold stamping method. Material – chrome-vanadium steel CrV50BV30. Hardened to 45-47 HRC. Material of inserts -S2 tool steel S2. Protected from corrosion by the chromium coating...

• Designed for squeezing sealant, glue or polyurethane foam from standard containers with a volume of 310 ml. • . • Equipped with a locking system for the working piston...

• Designed for squeezing sealant, glue or polyurethane foam from standard containers with a volume of 310 ml. • . • Equipped with a locking system for the working piston...

Tire valve replacement tool suitable for removing and installing Schrader type tire valves in tubeless wheels. Features a 180 degree swivel head and a valve core removal tool mounted in the base of the handle. Specially designed to pull the tire valve assembly through the rim...

12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Rod of the wrench is provided with a mounting spade. Heat treated to hardness 39-41 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effe..

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 75 degrees offset of the box end profile relatively to the wrench surface provides more c..