All Products

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Made by cold stamping method. Square drive shape allows to rotate the fastener at an angle up to 15 °. Equipped with a spring-loaded holding ball. Material - chrome-vanadium tool steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corro..

Made by cold stamping method. Square drive shape allows to rotate the fastener at an angle up to 15 °. Equipped with a spring-loaded holding ball. Material - chrome-vanadium tool steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corro..

Gauges are made by stamping method on clearance free dies from calibrated sheet steel. Sets are assembled in a plastic housing with a screw lock. Gauges have marking by size made by laser engraving. Individual packaging - blister card...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard open end profile and 12-point working profile. Hinged connection allows to change inclination angle of the end part and simplifies work in hard-to-reach places. Heat treated to hardness 39-41 HRC. ..

Twist drill with cylindrical shank. Material - high-speed steel Р6М5. Drill accuracy class - B. Meets the requirements of GOST 10902-77. Comes in an individual blister pack of 2-3 pieces of the same size...

Waterproof, comfortable work gloves with excellent grip. The first 3/4 layer is covered with latex + the second layer + palm is covered with foam latex, which provides good moisture and wear resistance, as well as mechanical resistance. The fingertips are very sensitive and flexible. Good grip in..

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Made of the chrome-vanadium tool steel by the hot stamping method. Has 12 point working profile OVER DRIVE. Spanner heads are made with high accuracy and hardened to 39-41 HRC. Wrench is protected from corrosion by the matt nickel-chromium coating...

Operating temperature range: -40 °C to +90 °C...

Gauges are made by stamping method on clearance free dies from calibrated sheet steel. Sets are assembled in a plastic housing with a screw lock. Gauges have marking by size made by laser engraving. Individual packaging - blister card...