All Products

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Rod of the wrench is provided with a mounting spade. Heat treated to hardness 39-41 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effe..

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Rod of the wrench is provided with a mounting spade. Heat treated to hardness 39-41 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effe..

Material - tool steel 60CRV. Hardness of the working part - 52-58 HRC. Supplied on an individual plastic holder...

Made of the chrome-vanadium tool steel by the hot stamping method. Has a standard open end profile and OVER DRIVE box end working profile. Spanner heads are made with high accuracy and hardened to 39-41 HRC. 15 degrees offset of the box end profile relatively to the wrench surface for more conven..

Set is intended for cleaning the surfaces, units, fastening elements and car bodies from old paint, dirt and corrosion. Brush bristle has brass coating. Set is completed with flat brushes in diameter 50, 60 and 75 mm and two shanks in diameter 6 mm for installation in the electric drill chuck. Th..

Set is intended for cleaning the surfaces, units, fastening elements and car bodies from old paint, dirt and corrosion. Brush bristle has brass coating. Set is completed with flat brushes in diameter 50, 60 and 75 mm and two shanks in diameter 6 mm for installation in the electric drill chuck. Th..

Made of the chrome-vanadium tool steel by the hot stamping method. Has 12 point working profile OVER DRIVE. Spanner heads are made with high accuracy and hardened to 39-41 HRC. Wrench is protected from corrosion by the matt nickel-chromium coating...

Intended for professional usage and has improved strength characteristics and extended service life. Screwdriver has a standard slotted magnetized working profile. Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 HRC and protected against corrosion by the chromiu..

Made of chrome-vanadium tool steel by the cold stamping method. Has a standard slotted profile of the working part. Screwdriver rod has a square profile, hardened and protected against corrosion by the chromium plating. Has a magnetized working part. Equipped with a plastic handle with a rubber ..

Intended for removal of the fuel filter of diesel engines. Has a split design of the working part with a size 27 mm and a standard square drive 1/2" (12.5 mm) for the tap wrench. Is used for HDi 2,0/2,2 engines of Citroen C4 and C5; Fiat Scudo, Ulysse 2,0 JTD; Ford Focus, Galaxy, Kuga 2,0 TDCi; Pe..

Intended for removal of the fuel filter of diesel engines. Has a split design of the working part with a size 27 mm and a standard square drive 1/2" (12.5 mm) for the tap wrench. Is used for HDi 2,0/2,2 engines of Citroen C4 and C5; Fiat Scudo, Ulysse 2,0 JTD; Ford Focus, Galaxy, Kuga 2,0 TDCi; Pe..

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...