All Products

The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating. External 12-point Spline inserts working profile. Inserts length - 30 mm. Bits operating size - М5, М6, М8, М10, М12. In the set adapter from square 1/2"..

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Made by hot stamping (forging hammers). Material – chrome-vanadium tool steel 31CrV3. Hardened to hardness 44-47 HRC. Cutting edges are induction hardened to 55-58 HRC. Equipped with comfortable ergonomic two-component handles. Protected against corrosion by chemical oxidation...

Intended for windscreen wiper arm dismounting. Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Intended for mounting on driveshaft arm up to 16 mm in diameter. Working screw is equipped with a supporting ball and a plastic handle. Working screw stroke - 28 mm..

Intended for windscreen wiper arm dismounting. Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Intended for mounting on driveshaft arm up to 16 mm in diameter. Working screw is equipped with a supporting ball and a plastic handle. Working screw stroke - 28 mm..

Flat brush is designed to clean metal, wood and plastic surfaces from old paint, dirt and corrosion. Brush bristle has brass coating. Wire diameter - 0.3 mm. Connecting thread for installation on angle grinders - M14*2.0 mm. Maximum brush rotation speed - 12500 rpm. Delivered in individual card..

Made from chrome-vanadium steel by the cold stamping method. Has 6-point socket. Equipped with a hole 21 mm in diameter for the tap wrench. Protected against corrosion by the matt nickel-chromium coating...

Used for lifting and carrying sheet glass and other goods which have a smooth surface. Equipped with suction cups 120 mm in diameter. Delivered in individual cardboard box...

The set contains eight adapters in sizes :1/2"-72mm and 50mm 3/8"-65mm , 50mm and 25mm 1/4"-65mm , 50mm and 30mm...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard open end profile and 12-point box end working profile. Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °. Swivel allows you to change the angl..

Set is equipped with hex keys placed on a plastic holder. Individual packaging - a blister...

Flexible spring allows you to reach the most awkward of places. As a gripper used a magnet with a holding force 0.9 kgf. Telescopic bar allows to adjust the length of the tool from 165 to 830 mm. Equipped with a plastic handle. Protected from corrosion by chrome plating. Comes stored and orgini..