All Products

Insert with a hex external working profile. Socket is made by cold stamping method. Material – chrome-vanadium steel CrV50BV30. Hardened to 45-47 HRC. Material of inserts -S2 tool steel S2. Wear-resistant, suitable for the long-term usage at max loads. Protected from corrosion by the chromium ..

Intended for professional usage and has improved strength characteristics and extended service life. Screwdriver has a standard slotted magnetized working profile. Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 HRC and protected against corrosion by the chromiu..

Used for rewinding brake calipers when replacing brake blocks. Intended for brake cylinders of VAG, Renault Megane, Scenic and Volvo with the ERV electric handbrake system. Mandrel is used in with brake calipers rewind tool. External diameter of the mandrel - 39 mm. Pins with a diameter 3 mm are..

Used for rewinding brake calipers when replacing brake blocks. Intended for brake cylinders of VAG, Renault Megane, Scenic and Volvo with the ERV electric handbrake system. Mandrel is used in with brake calipers rewind tool. External diameter of the mandrel - 39 mm. Pins with a diameter 3 mm are..

Used to install the camshaft in the needed position when adjusting and repairing the gas distribution system. Has a special design with two internal pins and a square drive for the tap wrench. Intended for AUDI 2.0 TFSI engine repair with the chain drive. Functional analogue of the original devic..

Used to install the camshaft in the needed position when adjusting and repairing the gas distribution system. Has a special design with two internal pins and a square drive for the tap wrench. Intended for AUDI 2.0 TFSI engine repair with the chain drive. Functional analogue of the original devic..

Designed for using with a pneumatic impact tool. 6-point operating profile. Square drive 1/2". Made by the method of cold stamping. Socket material - chrome-molybdenum steel. Protected against corrosion by the chemical oxidation...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

6-point operating profile. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Designed for using with a pneumatic impact tool. 6-point operating profile. Square drive 1/2". Made by the method of cold stamping. Socket material - chrome-molybdenum steel. Protected against corrosion by the chemical oxidation...

Material - tool steel 60CRV. Hardness of the working part - 52-58 HRC. Supplied on an individual plastic holder...

Designed to fix and secure cargo while using mechanical tension belts. Made of high impact polyurethane. Suitable for work with securing of cargo ties with belt widths of 50 and 75 mm...