The saw blades for machining a particular material differ depending on the area of application.
With this equipment it is possible to work with hard or thick wood, make straight or curved cuts, rough or clean (finishing) depending on the type of material...
Designed for using with a pneumatic impact tool.
Internal Torx® working profile.
Square drive 1/2".
Made by the method of cold stamping.
Socket material - chrome-molybdenum steel.
Protected against corrosion by the chemical oxidation...
Spline insert with the external 12-point working profile.
Socket is made by cold stamping method.
Material – chrome-vanadium steel CrV50BV30.
Hardened to 45-47 HRC.
Material of inserts -S2 tool steel S2.
Wear-resistant, suitable for the long-term usage at max loads.
Socket is chrome plated wit..
12-point sockets.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
6-point operating profile.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
Made by hot stamping (forging hammers).
Material – chrome-vanadium tool steel 31CrV3.
Hardened to hardness 44-47 HRC.
Cutting edges are induction hardened to 55-58 HRC.
Equipped with comfortable ergonomic two-component handles.
Protected against corrosion by chemical oxidation...
Spline insert with the external 12-point working profile.
Socket is made by cold stamping method.
Material – chrome-vanadium steel CrV50BV30.
Hardened to 45-47 HRC.
Material of inserts -S2 tool steel S2.
Wear-resistant, suitable for the long-term usage at max loads.
Socket is chrome plated wit..
