All Products

Designed for crankshaft fixing during adjustment of gas distribution mechanism phases. Intended for 2.0, 2.4, 2.8, 3.0 and 3.2 L FSI VAG engines. Size of the thread M14x1.5 mm...

Designed for crankshaft fixing during adjustment of gas distribution mechanism phases. Intended for 2.0, 2.4, 2.8, 3.0 and 3.2 L FSI VAG engines. Size of the thread M14x1.5 mm...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). Has a standard open end profile and 12-point box end working profile. Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °. Heat treated to hardness 39-41 HRC. ..

Designed for using with a pneumatic impact tool. Internal Torx® working profile. Square drive 1/2". Made by the method of cold stamping. Socket material - chrome-molybdenum steel. Protected against corrosion by the chemical oxidation...

Designed for using with a pneumatic impact tool. Internal Torx® working profile. Square drive 1/2". Made by the method of cold stamping. Socket material - chrome-molybdenum steel. Protected against corrosion by the chemical oxidation...

Designed for using with a pneumatic impact tool. 6-point operating profile. Made by the method of cold stamping. Socket material - chrome-molybdenum steel. Has a reduced wall thickness. Protected against corrosion by phosphatizing...

Made by hot stamping (forging hammers). Material – chrome-vanadium tool steel 31CrV3. Hardened to hardness 44-47 HRC. Cutting edges are induction hardened to 55-58 HRC. Equipped with comfortable ergonomic two-component handles. Protected from corrosion by nickel-chromium coating with matt surfa..

Set includes screwdrivers with a round rod. Packaging set - blister...

Set is designed for number marking on plastic materials. Stamps of the set are made by the milling method from chrome-vanadium tool steel. Hardened to 58-62 HRC. Protected against corrosion by phosphatizing. Set includes 9 number stamps from 0 to 9. Packaging - plastic case...

Used for removal and installation oil filters of internal combustion engines. Made by the method of precision casting from aluminum alloy. Has internal 1/2" (12,5 mm) square drive that allows to use tap wrenches and extensions, also to install a filter with a controlled torque in full compliance w..

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Equipped with the holes with a diameter 15 mm for the tap wrench. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Intended for dismantling external and internal bearings, pulleys and gears from the shafts and other interference fitted parts. Swivel locking design of grippers allows to hold securely the dismountable part. Can be used for external and internal grip. The four-beam design of the traverse allows ..