All Products

Bit drills twisted with a cylindrical shank alloyed with cobalt. Material - high-speed steel P6M5K5 with a cobalt content 5%. Has a cross-shaped sharpening of the cutting part at an angle 135 ° which reduces the possibility of drill displacement during works. Bit drills are hardened to 64-67 HRC...

Ued for sinking of brake pistons which require rotation. Intended for a wide range of European and American passenger cars equipped with disc brake system. Has a standard square drive 3/8" for the tap wrench. Comes stored and orginized in a individual blister pack...

Ued for sinking of brake pistons which require rotation. Intended for a wide range of European and American passenger cars equipped with disc brake system. Has a standard square drive 3/8" for the tap wrench. Comes stored and orginized in a individual blister pack...

Working profile Super Lock. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Rods of the wrench are made by resistance welding. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Used for friction units oiling with liquid lubricants which do not require supply under pressure. Equipped with a flexible tip...

Spline insert with an opening has the external 12-point working profile. Socket is made by cold stamping method. Material – chrome-vanadium steel CrV50BV30. Hardened to 45-47 HRC. Material of inserts -S2 tool steel S2. Wear-resistant, suitable for the long-term usage at max loads. Socket is ch..

Spline insert with an opening has the external 12-point working profile. Socket is made by cold stamping method. Material – chrome-vanadium steel CrV50BV30. Hardened to 45-47 HRC. Material of inserts -S2 tool steel S2. Wear-resistant, suitable for the long-term usage at max loads. Socket is ch..

Used for tapping of internal thread in blind and through holes with tap holder. Material - high-speed steel HSS4341. Hardened to 62-64 HRC. Set consists of 2 taps with reduced size and complete thread profile size. Packaging - plastic case...

Designed for cutting metal, stone and brick. Made by the hot stamping method (forging hammers). The working part is hardened to 45-46,5 HRC. The width of the working part - 20mm. Equipped with an anatomical handle with hand protection. Protected from corrosion by paint coating...

Designed to unclamp the steering knuckle when replacing the shock absorber. Used for repair of cars VW, Audi, Skoda, Seat, Ford, BMW, Citroen, Renault and Peugeot. Working part is oval with size 5.5x8.2 mm. It is a functional analogue of the device VAG 3424...

Designed to unclamp the steering knuckle when replacing the shock absorber. Used for repair of cars VW, Audi, Skoda, Seat, Ford, BMW, Citroen, Renault and Peugeot. Working part is oval with size 5.5x8.2 mm. It is a functional analogue of the device VAG 3424...