All Products

Intended for ignition coils dismantling of VAG. Intended for 8 and 12 cylinder engines VW Phaeton, B5 1.8T, GTI, FSI 2.0. Puller gripper design allows to dismantle carefully the ignition coil without damaging it. Working part of the puller is made of chrome-vanadium tool steel, hardened and prote..

Intended for ignition coils dismantling of VAG. Intended for VW Bora, Golf, Passat, Sharan, Touareg, R32, Phaeton, T5, V5 2.3, V6 3.2. Puller gripper design allows to dismantle carefully the ignition coil without damaging it. Working part of the puller is made of chrome-vanadium tool steel, harde..

Designed for using with a pneumatic impact tool or wrenches with a torque amplifier. Internal 4-point working profile for the dismounting of wheel fittings. Made by hot stamping (forging hammers). Socket material - chrome-molybdenum steel. Protected against corrosion by phosphatizing...

Cup brush is intended for cleaning metal, wood and plastic surfaces from old paint, dirt and corrosion. Brush has twisted steel bristle with wire diameter 0.5 mm. Brush is equipped with a shank with a diameter 6 mm for installation in the chuck of electric drill. Maximum brush rotation speed - 45..

Cup brush is intended for cleaning metal, wood and plastic surfaces from old paint, dirt and corrosion. Brush has twisted steel bristle with wire diameter 0.5 mm. Brush is equipped with a shank with a diameter 6 mm for installation in the chuck of electric drill. Maximum brush rotation speed - 45..

The cut-resistant gloves are very strong, flexible and very comfortable, made of high-tech HPPE glass and steel fibers, which are particularly protective against cuts. The palm of the gloves is covered with a thin breathable nitrile rubber foam that also protects against oils, grease and mechanical..

Intended for removing broken fasteners with size from М3 to М14. Extractors are made by the milling method from high-speed steel similar to P6M5. Set includes extractors - М3-М6, М6-М8, М8-М11, М11-М14. Comes stored and orginized in a individual blister pack...

Made of chrome-vanadium steel by the drawing method. It has standart hex external operating profile. Heat treated to hardness 47-52 HRC. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Material: PVC. thickness: 0.13 mm. width: 12 mm. length: 10 m...

Used to measure the compression of VAZ 2101-099 engines and engines with not deep plug boxes. Manometer with a diameter 62 mm is protected by a rubber cover and has a measurement limit 16 kgf/cm². Equipped with an aluminum bar 130 mm long with knurling, threaded tip, pressure relief valve and coni..

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Equipped with the holes with a diameter 15 mm for the tap wrench. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Working profile - internal Torx®. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV50BV30. Hardened to 45-47 HRC. Protected from corrosion by chrome plating...