All Products

Used for dismantling engine oil filters. Intended for oil filters with a diameter fom 65 to 110 mm. Has clamping crescent design with a return spring. Equipped with a plastic handle for ease of use. Comes stored and orginized in a individual blister pack...

Intended for dismantling external and internal bearings, pulleys and gears from the shafts and other interference fitted parts. Swivel locking design of grippers allows to hold securely the dismountable part. Can be used for external and internal grip. Has a thrust bolt with a standard hex socket..

Waterproof, comfortable work gloves with excellent grip. The first 3/4 layer is covered with latex + the second layer + palm is covered with foam latex, which provides good moisture and wear resistance, as well as mechanical resistance. Excellent cold and moisture protection with work gloves. Goo..

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Rods of the wrench are made by resistance welding. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Made by hot stamping (forging hammers). Material – chrome-vanadium tool steel 31CrV3. Hardened to 43-45 HRC. Has comfortable ergonomic rubberized handles. It is eqquiped with pullback spring. Protected against corrosion by phosphatizing...

Made by hot stamping (forging hammers). Material – chrome-vanadium tool steel 31CrV3. Hardened to 43-45 HRC. Has comfortable ergonomic rubberized handles. It is eqquiped with pullback spring. Protected against corrosion by phosphatizing...

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers). It has standart hex working profile. Equipped with the holes with a diameter 15 mm for the tap wrench. Protected against corrosion by the nickel-chromium coating with the matt surface effect...

Tap wrench is made by cold stamping method. Equipped with a spring-loaded holding ball. Material - chrome-vanadium tool steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corrosion...

Made by hot stamping (forging hammers). Material – chrome-vanadium tool steel 31CrV3. Hardened to hardness 44-47 HRC. Cutting edges are induction hardened to 55-58 HRC. Equipped with comfortable ergonomic two-component handles. Protected from corrosion by nickel-chromium coating with matt surfa..

Designed to measure linear dimensions using a measuring tape. The case of the measure tape is made of ABS plastic, resistant to mechanical stress and is additionally protected by a rubber cover. It has three built-in belt clips, a steel bracket for attaching to a belt and a return spring. The ye..

Designed to compress the suspension springs of cars during repair work. Hooks are made using cutting. Trapezoidal working thread is made by knurling method. The diameter of the working screw - 14 mm. Protected against corrosion by chemical oxidation. Supplied in an individual cardboard box...

Tap wrench is made by cold stamping method. Has a swivel head and a spring-loaded retaining ball. Material - chrome-vanadium tool steel CrV50BV30. It is hardened to hardness not less than 39HRC. It is chrome plated and matt finish to resist corrosion...